Autore Topic: Installazione inserti carbonio portiere [english inside]  (Letto 2011 volte)

0 Utenti e 1 Visitatore stanno visualizzando questo topic.

Carbon R

  • Spam Driver
  • *******
  • Post: 13981
  • Iscritto: Nov 2004
  • Località: Brescia [provincia]
  • Daniele












    Quick install, very easy to do. Thanks for TopShop for the great deal!

    If you want to remove the door you can, but you don't need to. Removing the door allows you to apply more pressure for a longer time on the door insert.

    If you don't want to remove the door then skip to step 2.

    1. Remove the screws where indicated. There is also ONE screw on the back that holds the handle and the lock mechanism in place with the door. Remove this one screw and your in business. For the driver side door, remove the plug that connects the power mirrors in.

    2. Take a key or flat head screwdriver and pull a corner of the cloth out and pull the rest out leaving the foam still intact (most of it). This will help reduce vibration.

    3. Apply urethane (that came in the package - I think - if not get it at the hardware store) and make sure you pay close attention to the corners. MAKE SURE YOU DON'T MARK ANYTHING OUTSIDE OF THE FOAM OR ELSE IT WILL BE HARD TO CLEAN UP. THIS STUFF IS EXTREMELY HARD TO REMOVE!
    Put the carbon fiber door insert in place carefully.

    4. Apply pressure to the door insert for at least 20 minutes or until it can support itself and leave it untouched for at least 2 hours. I used a towel and bubble wrap to cover the door insert then placed a bag of rice and peas (I think) on top to add constant pressure and left it there for 3 hours.

    5. Install back the way you opened everything. Screw everything in place and you're done!
    [/list]

    Ex Celica 143
    Ex Celica TS
    Jeep Renegade 2.0 4x4 AT9 Limited '15
    Mazda MX-5 NA 1.6 90hp '96


    RockTs

    • Gentleman Driver
    • *****
    • Post: 1000
    • Iscritto: Apr 2005
    • Località: Bora Bora
    Risposta #1 il: Lun 17 Apr, 2006, 20:12:33
    MAAAA MIA...

    Per? strapparla fa un certo senso...:???:

    Non toglierei mai la pellicina alla mia!



    Carbon R

    • Spam Driver
    • *******
    • Post: 13981
    • Iscritto: Nov 2004
    • Località: Brescia [provincia]
    • Daniele
    Risposta #2 il: Lun 17 Apr, 2006, 20:17:48
    Ma se ci devi mettere il pannello in carbonio...

    Ex Celica 143
    Ex Celica TS
    Jeep Renegade 2.0 4x4 AT9 Limited '15
    Mazda MX-5 NA 1.6 90hp '96


    revan

    • Pirata della Strada
    • **
    • Post: 274
    • Iscritto: Apr 2006
    • Località: Roma
    Risposta #3 il: Lun 17 Apr, 2006, 20:18:17
    infatti a me verrebbe troppo il senso di rovinarlo! Per? devo dire che ? carino, ma alla fine si mimetizza abbastanza con il resto della portiera che ? grigio scuro

    Ricordati sempre, fai la tua macchina come la vuoi tu, non come la vogliono gli altri.


    Carbon R

    • Spam Driver
    • *******
    • Post: 13981
    • Iscritto: Nov 2004
    • Località: Brescia [provincia]
    • Daniele
    Risposta #4 il: Lun 17 Apr, 2006, 20:29:22



    Ex Celica 143
    Ex Celica TS
    Jeep Renegade 2.0 4x4 AT9 Limited '15
    Mazda MX-5 NA 1.6 90hp '96


    HPDxxx

    • Moderatore
    • Spam Driver
    • *****
    • Post: 12710
    • Iscritto: Feb 2005
    • Località: Varese
    Risposta #5 il: Lun 17 Apr, 2006, 20:39:42
    a me fanno MOLTO sesso quegli inserti in carbonio  :porc:


    Cappellaio Matto

    • Vero manico
    • ****
    • Post: 650
    • Iscritto: Apr 2004
    • Località: Latina
    Risposta #6 il: Dom 22 Apr, 2007, 13:54:41
    Oddio la celi con il cambio automatico che schif!! ;)

    Belli gli inserti nelle portiere!

    Ho una Alfa Spider diesel...non siamo tutti perfetti hahahh


     

    SimplePortal 2.3.7 © 2008-2025, SimplePortal